K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
7. Remove the right idler pulley (ribbed) retaining bolt.
8. Remove the right idler pulley.
9. Remove the left idler pulley (smooth) bolt.
10. Remove the left idler pulley.
11. Remove the drive belt tensioner bolt.
12. Remove the drive belt tensioner.
13. Slide the PCV oil separator off the mounting bracket.
14. Remove the oil separator bracket, fuel bleed valve, and nuts.
15. Remove the bolt for the engine wire harness retainer.
16. Remove the drive belt tensioner and generator mounting bracket 4 bolts.
17. Remove the drive belt tensioner and generator mounting bracket.
Installation Procedure
