K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner Replacement
Drive Belt Tensioner Replacement
Removal Procedure
1. Remove the drive belt.
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.
Installation Procedure
1. Install the drive belt tensioner. Align the pin with the hole in the generator bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt tensioner bolt.
-
Tighten drive belt tensioner bolt to 41 Nm (30 ft. lbs.).
3. Install the drive belt.