K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
3. Install the valve spring (3), the painted end of the valve spring goes toward the cylinder head.
4. Install the valve spring upper seat (2).
Caution: Compressed valve springs have high tension against the valve spring compressor. Valve springs that are not properly compressed
by or released from the valve spring compressor can be ejected from the valve spring compressor with intense force. Use care when
compressing or releasing the valve spring with the valve spring compressor and when removing or installing the valve stem keys. Failing to
use care may cause personal injury.
5. Using the J 44646 compress the valve spring.
6. Install the valve keys to the valve stem.
Notice: The valve stem keys must correctly seat in the valve spring cap. Engine damage may occur by not installing properly.
7. Carefully release the valve spring pressure. Make sure the valve keys stay in place.
8. Continue to install the three remaining valve stem seals for that cylinder.
