K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
4. Install the water pump to water pump outlet pipe gasket.
5. Install the engine wiring harness retainer on the water pump outlet pipe inner stud.
6. Install the water pump to water pump outlet pipe nuts.
-
Tighten the water pump to water pump outlet pipe nuts to 21 Nm (1 ft. lbs.).
7. Install the thermostat housing crossover.
8. Install the Crankshaft balancer.
9. Install the fan clutch.
10. Fill the engine with coolant.
11. Install the left front fender wheelhouse inner panel (1).