K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
25. Remove the turbocharger exhaust pipe out the bottom of the vehicle.
Installation Procedure
1. From under the vehicle, position the turbocharger exhaust pipe to rear of the engine Do not install the pipe to the turbocharger.
2. Install the right exhaust pipe with NEW gasket to the turbocharger. Align the tabs on the gasket to face inward.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust pipe to turbocharger bolts (2).
-
Tighten the exhaust pipe to turbocharger bolts to 53 Nm (39 ft. lbs.).