K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
4. Install the turbocharger exhaust pipe with a NEW gasket to the turbocharger.
5. Install the turbocharger exhaust pipe bolts/nuts.
-
Tighten the turbocharger exhaust pipe bolts/nuts to 53 Nm (39 ft. lbs.).
6. Install the turbocharger exhaust pipe heat shield.
7. Install the upper turbocharger exhaust pipe heat shield bolts (1, and 3).
-
Tighten the turbocharger exhaust pipe heat shield bolts to 8 Nm (71 inch lbs.).
8. Install the turbocharger heat shield.
9. Install the turbocharger heat shield bolts.
-
Tighten the turbocharger heat shield bolts to 9 Nm (80 inch lbs.).