K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Important: Apply lubricant to the insulators to aid in installation.
13. If equipped with a 6.0L or 8.1L engine, install the insulators to the muffler hangers.
14. Install a new exhaust manifold pipe gasket.
15. With the aid of an assistant, slide the muffler forward in order to install the muffler to the catalytic converter.
16. Install the muffler hangers to the insulators.
17. If equipped with a 6.6L engine, install the exhaust muffler nuts.
-
Tighten the nuts to 40 Nm (30 ft. lbs.).
18. If equipped with a 6.0L or 8.1L engine, install the exhaust muffler nuts.
19. Tighten the exhaust pipe clamp bolt.
-
Tighten the nuts to 40 Nm (30 ft. lbs.).
-
Tighten the clamp to 40 Nm (30 ft. lbs.).
