K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
7. If equipped with a 6.0L or 8.1 L engine, perform the following:
-
Connect the oxygen sensor electrical connector (1).
-
Connect the CPA retainer.
8. Remove the adjustable jackstands from catalytic converter or exhaust manifold pipe.
9. If equipped with a 4.3L, 4.8L, or 5.3L engine, perform the following:
-
Connect the oxygen sensor electrical connector (1).
-
Connect the CPA retainer.
-
Clip the oxygen sensor electrical connector to the hose clip
10. If equipped with a 4.3L, 4.8L, or 5.3L engine, perform the following:
-
Connect the forward oxygen sensor electrical connector.
-
Connect the CPA retainer.
-
Install the clip around the engine harness and the oxygen sensor pigtail.
