K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Air Duct: Service and Repair
Deflector Replacement - Instrument Panel Air - Left
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) bezel.
2. Remove the air deflector housing from the I/P by prying it out.
3. Disconnect the electrical connectors.
4. Remove the air deflector screws.
5. Remove the air deflector from the housing.
INSTALLATION PROCEDURE
1. Install the air deflector to the housing.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the retaining screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the electrical connectors.
4. Install the air deflector assembly to the I/P.
5. Install the I/P bezel.
