K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
6. Install the wheel hub and bearing (5) and splash shield (6) to the vehicle, 15 series.
7. Install the wheel hub and bearing mounting bolts, the 15 series. Install the wheel hub and bearing mounting bolts, 25/35 series.
^
Tighten the wheel hub to knuckle bolts to 180 Nm (133 lb ft).
8. Install the nut (2) and washer (3) retaining the wheel drive shaft assembly to the wheel hub and bearing.
^
Tighten the nut to 210 Nm (155 lb ft).
9. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
^
Tighten the bolt to 12 Nm (106 inch lbs.).
10. Install the rotor.
11. Install the tire and wheel.
12. Lower the vehicle.
