K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
11. Remove the bolts (1) retaining the EGR to the EGR cooling tube.
12. Separate the EGR from the EGR cooling tube.
INSTALLATION PROCEDURE
1. Install the EGR to the EGR cooling tube.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts (1) to retain the EGR to the EGR cooling tube.
Tighten
Tighten bolts to 20 N.m (15 lb ft.)