K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
AIR CLEANER OUTLET DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the outlet duct clamp at the upper intake manifold cover.
2. Remove the upper intake manifold cover from the outlet duct.
3. Remove the upper intake manifold cover.
4. Loosen the outlet duct clamps at the turbocharger and the mass air flow/intake air temperature (MAF/IAT) sensor.
5. Remove the outlet duct from the turbocharger and MAT/IAT sensor.
INSTALLATION PROCEDURE
IMPORTANT: The outlet duct must be fully seated against the positive stop feature on the turbocharger inlet.
