K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
7. Loosen both hose clamps for the charged air cooler outlet duct to intake manifold tube hose.
Important: Do not use a screwdriver or other prying tool to remove the hose. The hose can be damaged.
8. Using a twisting motion remove the hose from the intake manifold tube and the pipe.
9. Cover the opening on the pipe and the intake manifold tube with tape.
10. Remove the bolt (2) retaining the outlet heater hose to the generator mounting bracket.
11. Remove the fuel filter mounting bolts.
12. Remove the fuel injection control module.
13. Position the outlet heater hose out of the way.
14. Remove exhaust gas recirculation (EGR) valve.
