K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
5. Install the bolts (2) retaining the engine wiring harness bracket.
Tighten
Tighten the wiring harness bracket bolts to 10 Nm (89 lb in).
6. Install the bolts (1) retaining the engine wiring harness bulk connectors.
Tighten
Tighten the engine wiring harness bulk connector bolts to 21 Nm (15 lb ft).
7. Connect the engine wiring harness bulk connectors.
8. Install the water outlet tube.
9. Install the glow plug relay bracket.
10. Install the auxiliary generator, it equipped.