K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
9. Install the right turbo charged air outlet hose.
10. Install the air cleaner outlet duct.
11. Connect the negative battery cable.
12. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
Fuel Return Hose Replace - Fuel Return to Fuel Injection Pump
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
3. Remove the air cleaner outlet duct.
4. Remove the right turbo charged air outlet hose.
