K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the fuel pipe bundle using the following procedure:
1.1.
Install the fuel bundle (3) to the chassis by guiding the pipes towards the rear of vehicle.
1.2.
Lift the fuel pipes, while guiding the forward portion of the pipes up towards the engine connections.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Attach the fuel bundle to the chassis.
Tighten
Tighten the fuel bundle retaining nuts (1) to 16 N.m (12 lb ft).
3. Install the fuel system cooler (1).
