chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel Feed Pipe Replacement|Page 6518 > < Fuel Feed Pipe Replacement|Page 6516
Page 53
background image

1. Loosen the outlet duct clamp at the upper intake manifold cover.
2. Remove the upper intake manifold cover from the outlet duct.
3. Remove the upper intake manifold cover.
4. Drain the engine coolant.
5. Disconnect the battery negative cable.

6. Remove the charged air cooler inlet duct to turbocharger charge air cooler outlet.

7. Remove the nut retaining the battery cable to the generator.
8. If equipped, remove the battery cable to the auxiliary generator.
9. Remove the battery cable harness clip from the bracket.

Fuel Feed Pipe Replacement|Page 6518 > < Fuel Feed Pipe Replacement|Page 6516