K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Position the bracket (1) over the sensor (2).
2. Install the boost pressure sensor into the intake manifold and guide the bracket over the stud.
3. Position the coolant tube (1) over the stud.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the retaining bolt (4).
Tighten
Tighten the bolt to 9 N.m (80 lb in).
5. Connect the electrical connector (2) to the boost pressure sensor (3).
6. Install the air intake pipe to the turbocharger.
7. Install the air cleaner outlet duct.
