K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. If removed, install the auxiliary generator bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the auxiliary generator bracket bolt.
Tighten
Tighten the auxiliary generator bracket bolt to 50 N.m (37 lb ft).
3. Install the generator cable to the auxiliary generator, perform the following:
3.1. Install the generator cable.
3.2. Install the generator cable nut to the terminal stud.
Tighten
Tighten the generator cable nut to 9 N.m (80 lb in).
3.3. Slide the boot over the terminal stud.
