K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
7. Install the J 29193 or the J 29194.
^
Tighten the J 29193 or the J 29194 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
8. Remove the J 29193 or the J 29194.
9. Install the new relay rod prevailing torque nut.
^
Tighten the new prevailing torque nut to 62 Nm (46 ft. lbs.).
10. Install the engine protection shield, if equipped.
11. Lower the vehicle.
12. Check the wheel alignment.