K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Wheel Bearing: Service and Repair
Front Suspension
Front Wheel Hub, Bearing, and Seal Replacement
^
Tools Required
-
J 45859 Axle Remover
Removal Procedure
Notice: Never place vehicle on the ground with the halfshaft removed or the halfshaft nut torqued improperly. Otherwise, bearing seals may become
dislodged causing premature wear and/or damage to the hub and bearing assembly.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the rotor.
4. Remove the wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle.
5. Remove the wheel drive shaft nut retaining cover.