K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
9. Connect EGR vacuum hose to EGR.
10. Install the upper intake manifold tube and nuts.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
11. Install the intake heater and gasket.
Tighten
Tighten the intake heater to 50 N.m (37 lb ft).
12. Install the turbocharger boost sensor with bracket.
13. Install the turbocharger boost sensor bracket bolt.
Tighten
Tighten the bolt to 10 N.m (89 lb in).
14. Install air intake duct.
15. Fill cooling system. Refer to Draining and Filling Cooling System in Cooling System.
