K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
24. Release the white cover (1).
25. Verify the white cover (1) conceals the natural colored lock (2).
26. If the white cover (1) does not conceal the natural colored lock (2), repeat the cable adjustment procedure.
27. Lower the vehicle and test the transmission for proper shift operation.
28. If all of the gear positions cannot be achieved, repeat the cable adjustment procedure.
Rear/Transmission End
Automatic Transmission Range Selector Cable Replacement (Rear/Transmission End)
Important: The range selector cable is a two piece cable assembly.
The front half (column end) or rear half (transmission end) of the range selector cable can be removed without removing the other end/half of the
range selector cable assembly.
Removal Procedure
1. Position the steering column shift lever to the park position.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Ensure the transmission manual shaft is positioned to mechanical park.
