K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
3. Align and install the cable to the bracket.
4. Install the retainer that secures the cable to the bracket.
5. Install a new E-clip to the front half (steering column end) of the cable.
6. Ensure that the transmission manual shaft lever is in the mechanical park position.
7. install the range selector cable end (2) to the transmission range selector lever ball stud (1).
8. Grasp the front half (steering column end) of the transmission cable (1) in the left hand and the rear half (transmission end) of the transmission
cable (2) in the right hand.
