K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Obtain the new D solenoid (1), E solenoid (4), or F solenoid (1). Install O-rings (2) and (3) and lubricate with clean transmission fluid. Push the
new solenoid into the control valve assembly (5) with the wiring harness connector in the correct position.
2. Reinstall the solenoid retainer (6). Reconnect the internal wiring harness to the solenoid(s) replaced.
3. For new C solenoid (3), install O-rings(2) and (4) and lubricate with clean transmission fluid. Push the new C solenoid (3) into the control valve
assembly with the wiring harness connector in the correct position. Reinstall the solenoid retainer (1).
4. Install the oil pan and suction filter.
