K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
2. Remove spring (2) and control relief valve (1).
3. Using tool J43773, compress the exhaust backfill spring until retaining clip (1) is loose. Remove retaining clip (1).
4. Remove spring (2) and backfill exhaust valve (1).
Control Valve Body Cleaning and Inspection
Control Valve Body Cleaning and Inspection
Clean and Inspect
^
Tools Required
-
J 33163 Valve Tray Set
Important:
^
Transmission damage may occur when control valve assembly springs and other parts are mistakenly interchanged. Interchanging parts can be
avoided by observing the following precautions:
-
Tag each part as it is removed.