K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
New Service Procedure
Removal and installation procedures for the complete assembly have not changed with this modification. However, it is important to know that the
correct Wire Harness, P/N 29539792, must be used. This harness includes an additional connector for the current G solenoid. When securing the G
solenoid to the Modulated Main Valve Body, be certain to insert the retaining clip from the "Main Body" side. The clip needs to become trapped
between the two components. There are now six gold colored bolts (longer 65 mm (2.56 in) that secure the modulated main body to the valve body
assembly and also to the main case.
Parts Information
Parts are currently available from GMSPO.
Disclaimer
