K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the transfer case drain plug.
^
Tighten the transfer case drain plug to 20 Nm (15 ft. lbs.).
2. Fill the transfer case to the bottom of the fill hole with the approved transfer case fluid.
3. Install the transfer case fill plug.
^
Tighten the transfer case fill plug to 20 Nm (15 ft. lbs.).
4. Install the transfer case shield.
5. Lower the vehicle. Refer to Vehicle Lifting.
