chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Ignition Set Timing Connector Location - Revised|Page 4721 > < Ignition Control Module|Locations|Page 4716
Page 1
background image

Ignition Timing Connector: Technical Service Bulletins
Ignition Set Timing Connector Location - Revised

Group Ref.: 6E - Engine Fuel & Emission

Bulletin No.: 416514

Date: August, 1994

SUBJECT:
SECTION 6A - IGNITION SET TIMING CONNECTOR LOCATION

MODELS:
1994 CHEVROLET AND GMC TRUCK C/K MODELS WITH GASOLINE ENGINES

The location of the set timing connector is incorrectly called out in "SECTION 6A" of the "Driveability and Emissions" Service Manual.

The correct location of the set timing connector is inside the cab where the heater box and the carpet meet on the passenger side floor. Pull carpet back to
expose the single wire and connectors on the outside of the control module harness. The wire colors are tan with a black stripe.

Ignition Set Timing Connector Location - Revised|Page 4721 > < Ignition Control Module|Locations|Page 4716