K 3500 Truck 4WD V8-454 7.4L (1994)
Removing Shaft Lock Retaining Ring
4. Shaft lock (4).
Removing Components From Upper Shaft
5. Turn signal cancelling cam assembly (5).
6. Upper bearing spring (6).
7. Thrust washer (12).
8. Turn signal to "RIGHT TURN" position (up).
9. Multi-function lever and hazard knob assembly.
10. Screw (8) and signal switch arm (9).
Turn Signal Switch Removal Preparation
11. Turn signal switch screws (7).
12. Turn signal switch assembly (10).
^
Let switch hang freely.
^
To remove switch (10):
A. Hex head bolts (48).
B. Steering column support bracket assembly (47).
C. Turn signal switch connector from vehicle wire harness.
D. Wiring protectors (32) and (33).
E. Gently pull wire harness through column.
13. Key from lock cylinder set (18).
