K 3500 Truck 4WD V8-454 7.4L VIN J SFI (1996)
Staking Clutch Coil To Front Head
5. When coil is fully seated on the front head, use a 1/8" diameter drift punch and stake the front head at three places 120 degrees apart, to ensure
clutch coil remains in position.
Details Of Stakes In Front Head For Clutch Coil
-
Stake size should be only one-half the area of the punch tip and be only approximately 0.28-0.35mm (.010.015") deep.
6. Install rotor and bearing assembly and the clutch plate and hub assembly as described previously.
