K 3500 Truck 4WD V8-5.7L VIN R (1998)
10. Immerse the opposite end of the hose into a container partially filled with clean brake fluid.
11. Slowly open the bleeder valve at least 3/4 of a turn. Allow the fluid to flow until you see no air in the fluid.
^
Tighten the wheel cylinder or caliper bleeder valve to 13 Nm (110 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions. Check the brake pedal for sponginess. Repeat the bleeding procedure if the brake
pedal is spongy.
13. Repeat steps 9-12 at every wheel.
14. Disconnect the hose from the bleeder adapter.
15. Remove the J 29567 Brake Bleeder Adapter.
16. Fill the master cylinder to the proper level.
