K 3500 Truck 4WD V8-5.7L VIN R (1998)
Brake Caliper: Service and Repair
Removal and Installation
Delco
REMOVAL PROCEDURE
1. Remove two-thirds of the brake fluid from the master cylinder.
2. Raise the vehicle.
3. Support the vehicle with safety stands.
4. Remove the tire and the wheel. Reinstall two lug nuts to retain motor on models with composite rotors.
5. Compress the piston using adjustable pliers over the inboard lining tab and the caliper housing flange.
6. Remove the brake hose from the caliper by removing the inlet fitting bolt.
7. Remove the mounting bolts (1), (2).
