K 3500 Truck 4WD V8-5.7L VIN R (1998)
Brake Caliper: Specifications
If bumper gap exceeds 0.145 inch, remove old caliper and replace with new caliper. If bumper gap with new caliper measures between 0.058 and
0.145 inch, select shim from table. If bumper gap with new caliper exceeds 0.145 inch, replace anchor plate.
More Than 0 in.
But Not Exceeding
0.058 in
Use new key and spring when assembling new components.
Shim Thickness
None Required
More Than 0.058 in.
But Not Exceeding
0.101 in
Use new key and spring when assembling new components.
Shim Thickness
0.025 in
