K 3500 Truck 4WD V8-5.7L VIN R (1998)
Drive Belt Tensioner: Testing and Inspection
INSPECTION PROCEDURE
NOTICE: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. Remove the drive belt.
2. Position a hex-head socket on the belt tensioner pulley bolt head.
3. Move the drive belt tensioner through it's full travel.
-The movement should feel smooth.
-
There should be no binding.
-
The tensioner should return freely.
4. If any binding is observed, replace the tensioner.
5. Install the drive belt.
