K 3500 Truck 4WD V8-5.7L VIN R (1998)
Timing Cover: Service and Repair
REMOVAL PROCEDURE
1. Remove the crankshaft balancer.
2. Remove the water pump.
3. Drain the engine oil.
4. Remove all the engine oil pan fasteners except the two nuts at the rear of the engine.
5. Carefully separate the engine oil pan from the engine front cover.
6. Disconnect the crankshaft position (CKP) sensor wire.
7. Remove the engine front cover. Refer to Engine Front Cover Removal under Engine Unit Repair.
INSTALLATION PROCEDURE
