K 3500 Truck 4WD V8-5.7L VIN R (1998)
Alignment: Service and Repair
Preliminary Inspection
Important: Before making any adjustments affecting the caster, the camber, or the toe-in, inspect the front end.
1. Inspect the tires for the proper inflation pressure.
2. Inspect the front wheel bearing for proper adjustment.
3. Correct any excessive looseness before adjusting the following parts:
^
The ball joints
^
The tie rod ends
^
The relay rods.
4. Inspect the wheels and tires for runout.
5. Inspect the steering gear for looseness at the frame.
6. Inspect the shock absorbers for leaks or noticeable noise.
7. Inspect the control arms or the stabilizer shaft attachments for looseness.
8. Inspect the alignment equipment. Follow the manufacturer's instructions.
9. Inspect the level of the vehicle. The vehicle must be on a level surface fore and aft and side to side.
10. Inspect for excess drag or poor return of the steering wheel due to stiff or rusty suspension or linkage components.
