K 3500 Truck 4WD V8-5.7L VIN R (1998)
12. Install the tie rod nut. Tighten the nut to 48 Nm (35 ft lb).
13. Install the washer.
14. Install the drive axle nut. Tighten to 225 Nm (165 ft lb).
15. Install the brake rotor.
16. Install the brake caliper.
17. Install the tire and wheel assembly.
18. Remove the jack stand.
19. Lower the vehicle.
20. Check vehicle trim height. Refer to "Alignment" for procedures.