K 3500 Truck 4WD V8-5.7L VIN R (1998)
1. Install the 2-4 servo assembly into the 2-4 servo bore.
2. Install the J29714-A.
3. Tighten the bolt in order to compress the servo cover.
4. Install the servo cover retaining ring.
5. Remove the J29714-A from the oil pan flange.
6. Install the oil pan bolt.
-
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
7. Lower the vehicle.
8. Check the automatic transmission fluid level and install new automatic transmission fluid as needed. Refer to Transmission Fluid Checking
Procedure and Fluid Capacity.