K 3500 Truck 4WD V8-5.7L VIN R (1998)
2. Ensure that the transmission is in the mechanical park position. Position the transmission range select lever to PARK (P). Rotate the range select
lever clockwise until the lever reaches the full clockwise stop position.
3. Install the range select lever cable to the vehicle. Route the cable in the original location noted during removal.
4. Install the range select lever cable grommet to the floor panel.
5. Install the range select lever cable retainers on the cab floor pan.
6. Install the range select lever cable end to the steering column shift control.
7. Install the steering column filler panel to the steering column.
8. Install the carpet and the carpet retainers on the driver's side.
9. Install the door sill trim plate. Refer to Door Sill Plate Replacement in Interior Trim.
10. Install the hinge pillar trim panel. Refer to Hinge Pillar Trim Panel Replacement in Interior Trim.
11. Install the front seat. Refer to Seats.
