K 3500 Truck 4WD V8-5.7L VIN R (1998)
INSTALLATION PROCEDURE
-
Tools Required
-
J8092 Drive Handle
-
J8608 Outer Pinion Bearing Cup Installer
-
J24426 Outer Wheel Bearing Cup Installer
-
J24427 Inner Wheel Cup Bearing Installer
-
J39114-A Axle Shaft Seal Installer
1. Install the outer bearing cup into the hub using J8092 and J8608. Drive the cup beyond the retaining ring groove.
IMPORTANT: Be sure to install J8608 Upside down on J8092 so that the chamfer does not contact the bearing cup.
2. Install the retaining ring into the groove. Drive the cup back onto the retaining ring using J24426.
