K 3500 Truck 4WD V8-6.0L VIN U (2002)
9. Connect cable end to the equalizer.
10. Tighten the nut to the intermediate cable at the equalizer.
Tighten the nut to 3.5 Nm (31 inch lbs.).
11. Remove the safety stands.
12. Lower the vehicle.
13. Adjust the park brake cable.
Park Brake Cable Replacement - Left Rear (With RPO NYS)
Park Brake Cable Replacement - Left Rear (with RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the park brake cable from the equalizer by pulling down on the intermediate cable and release the cable from the equalizer bar.
4. Remove the cable from the mounting bracket by depressing the locking tabs.
