K 3500 Truck 4WD V8-6.0L VIN U (2002)
14. Remove the gasket (1) from the rocker cover.
15. Discard the OLD gasket.
16. Remove the oil fill cap from the oil fill tube.
17. Remove the oil fill tube from the rocker cover, if required.
18. Discard the oil fill tube.
Installation Procedure
Important:
-
All gasket surfaces should be free of oil or other foreign material during assembly.
-
DO NOT reuse the valve rocker arm cover gasket.
-
The valve rocker arm cover bolt grommets may be reused.
-
If the oil fill tube has been removed from the rocker arm cover, install a NEW fill tube during assembly.
1. Lubricate the O-ring seal of the NEW oil fill tube with clean engine oil.
