K 3500 Truck 4WD V8-6.0L VIN U (2002)
5. If equipped with a 8.1 L engine, position the wiring harness ground and negative cables. Position the anti-rotation tab on the negative cable in the
correct location.
6. Install the engine wiring harness ground/negative cable bolt.
Tighten
Tighten the engine wiring harness ground/negative cable bolt to 25 N.m (18 lb ft).
7. Lower the vehicle.
8. Install the negative cable clip to the positive cable clip.
9. If equipped with a 4.8L, 5.3L, or 6.OL engine, position the negative cable and engine wiring harness ring terminals to the engine block. Position
the anti-rotation tab on the negative cable in the correct location.
10. Install the engine wiring harness ground/negative cable bolt.
Tighten
Tighten the engine wiring harness ground/negative cable bolt to 25 N.m (18 lb ft).
11. Lower the vehicle.
12. Install the negative cable clip to the positive cable clip.