K 3500 Truck 4WD V8-6.0L VIN U (2002)
5. Tighten the steering linkage installer in order to seat the ball stud in the relay rod.
^
Tighten the installer to 54 Nm (40 ft. lbs.).
6. Remove the J 29193.
7. Install the prevailing torque ruts.
^
Tighten the mounting nut to 40 Nm (30 ft. lbs.).
^
Tighten the ball stud nut to 40 Nm (30 ft. lbs.).
8. Install the engine protection shield, if equipped.
9. Lower the vehicle.
