K 3500 Truck 4WD V8-6.0L VIN U (2002)
2. Install the tie rod seal (2) to the outer tie rod assembly (1).
3. Connect the outer tie rod assembly (1) to the steering knuckle (2).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the torque prevailing nut (3) to the outer tie rod stud (1).
^
Tighten the torque prevailing nut (3) to 50 Nm (37 ft. lbs.).
Important: Be sure the rack and pinion boot is not twisted after the toe adjustment.
5. Check the wheel alignment.
6. Tighten the jam nut against the outer tie rod end.
^
Tighten the nut to 68 Nm (50 ft.lbs.).
