K 3500 Truck 4WD V8-6.0L VIN U (2002)
5. Remove the nut retaining the outer tie rod end to the steering knuckle.
6. Using the J 24319-B (1), remove the outer tie rod end from the steering knuckle.
7. Remove the outer tie rod end from the inner tie rod.
Installation Procedure
1. Install the outer tie rod end to the inner tie rod.
2. Install the outer tie rod end to the steering knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the outer tie rod end retaining nut to the steering knuckle.
^
Tighten the nut to 55 Nm (40 ft. lbs.).
4. Install the outer tie rod end retaining bracket (2).
^
Tighten the retaining bolts to 65 Nm (48 ft. lbs.).
5. Install the tire and wheel.
6. Perform a four wheel alignment.
7. Tighten the tie rod jam nut.
^
Tighten the nut to 65 Nm (48 ft. lbs.).
