K 3500 Truck 4WD V8-6.0L VIN U (2002)
1. Apply the parking brake.
2. Shift the transmission into neutral.
3. Raise the vehicle. Refer to Vehicle Lifting.
4. Disconnect the transmission range selector cable from the shift lever and the bracket (2).
5. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
6. Remove the transmission range selector cable bracket from the vehicle.
Installation Procedure
1. Install the transmission range selector cable bracket to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transmission range selector cable bracket bolts (1).
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the transmission range selector cable to the bracket (2) and the lever.
4. Lower the vehicle.
5. Check the vehicle for proper operation. If adjustment of the cable is necessary, refer to Automatic Transmission Range Selector Cable Adjustment.
