K 3500 Truck 4WD V8-6.0L VIN U (2002)
9. Reassemble the tripot housing and the tripot seal using the following procedure:
9.1.
Pinch the swage ring (2) slightly by hand in order to distort it into an oval shape.
9.2.
Slide the distorted swage ring (2) over the large diameter of the seal.
9.3.
Place the tripot housing over the spider assembly.
9.4.
Install the seal onto the tripot housing.
9.5.
Align the tripot seal (1), with the swage ring (2) in place, over the flat area on the tripot housing (3).
10. Mount the base of J 36652 in a vise.
11. Check the inboard stroke position.
^
Use measurement A for the K1500 models.
^
Use measurement B for the K2500, K3500, and Hummer 2 models.
