K 3500 Truck 4WD V8-6.0L VIN U (2002)
Notice:
Refer to Fastener Notice in Cautions and Notices.
3.
Secure the small seal clamp (1) with J 35910 (or equivalent), a breaker bar, and a torque wrench
Tighten
Tighten the small seal clamp (1) to 136 N.m (100 lb ft).
4.
Check the gap dimension on the clamp ear. Continue tightening until the gap dimension is reached.
Important:
Assemble the tripot joint with the convolute retainer in the correct position, as illustrated.
5.
Install the convolute retainer tool over the inboard joint seal, being sure to capture the following convolutions:
^
2-5 for the 1500 model (except 1500HD)
^
2-4 for the 1500HD, 2500, 3500, and HUMMER H2 models.
